Debug Platform Ip Unicast - Cisco Catalyst 3750 Command Reference Manual
Hide thumbs
Also See for Catalyst 3750:
- Command reference manual (1154 pages) ,
- Software configuration manual (926 pages) ,
- Hardware installation manual (231 pages)
Table of Contents
Advertisement
Appendix B
Catalyst 3750 Switch Debug Commands
debug platform ip unicast
Use the debug platform ip unicast privileged EXEC command to enable debugging of
platform-dependent IP unicast routing. Use the no form of this command to disable debugging.
Syntax Description
adjacency
all
arp
dhcp
errors
events
interface
mpath
registries
retry
route
rpc
standby
statistics
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.1(11)AX
78-16181-03
debug platform ip unicast {adjacency | all | arp | dhcp | errors | events | interface | mpath |
registries | retry | route | rpc | standby | statistics}
no debug platform ip unicast {adjacency | all | arp | dhcp | errors | events | interface | mpath |
registries | retry | route | rpc | standby | statistics}
Display IP unicast routing adjacency programming event debug messages.
Display all platform IP unicast routing debug messages.
Using this command can degrade the performance of the switch.
Note
Display IP unicast routing Address Resolution Protocol (ARP) and ARP throttling debug
messages.
Display IP unicast routing DHCP dynamic address-related event debug messages.
Display all IP unicast routing error debug messages, including resource allocation
failures.
Display all IP unicast routing event debug messages, including registry and
miscellaneous events.
Display IP unicast routing interface event debug messages.
Display IP unicast routing multi-path adjacency programming event debug messages
(present when performing equal or unequal cost routing).
Display IP unicast routing forwarding information database (FIB), adjacency add,
update, and delete registry event debug messages.
Display IP unicast routing reprogram FIBs with ternary content addressable memory
(TCAM) allocation failure debug messages.
Display IP unicast routing FIB TCAM programming event debug messages.
Display IP unicast routing Layer 3 unicast remote procedure call (RPC) interaction
debug messages.
Display IP unicast routing standby event debug messages, helpful in troubleshooting Hot
Standby Routing Protocol (HSRP) issues.
Display IP unicast routing statistics gathering-related event debug messages.
Modification
This command was introduced.
debug platform ip unicast
Catalyst 3750 Switch Command Reference
B-45
Advertisement
Table of Contents
