Changing Audio Settings; Change Incoming Call Notifications - Polycom VVX 201 Series User Manual

You can also specify a separate timeout period that applies after you press a key or tap the screen. This is
called the User Input Idle Timeout. You can choose to set a higher User Input Idle Timeout than the Office
Hours and Off Hours Idle Timeouts so that when you're actively using the phone, power-saving mode
doesn't initiate as often.
Tip: If you press a key or tap the screen, the idle timeout period that applies (User Input Idle Timeout or
Office Hours/Off Hours Idle Timeout) is the timeout with the highest value.
T
ASK
1 Navigate to Settings > Basic > Power Saving > Timeouts.
2 Select Office Hours Idle Timeout, and enter the number of minutes the phone should wait, during
office hours, before starting power-saving mode.
Enter a number between 1 minute and 600 minutes. The default is 10 minutes.
3 Select Off Hours Idle Timeout, and enter the number of minutes the phone should wait, during
off-hours, before starting power-saving mode.
Enter a number between 1 minute and 10 minutes. The default is 1 minute.
4 Select User Input Idle Timeout, and enter the number of minutes the phone should wait after a key
press or screen select before starting power-saving mode.
Enter a number between 1 minute and 10 minutes. The default is 10 minutes.
5 Select Save.
R :
ELATED INFORMATION
Using Power-Saving Mode
Change Your Office Hours

Changing Audio Settings

You control certain audio settings on your phone, including the ringtone for incoming calls from all contacts
or a specific contact, where call notifications play, and the volume or the ringtone or call audio.
R :
ELATED INFORMATION
Features for Hearing-Impaired Users
Change the Volume
Enable Electronic Hookswitch

Change Incoming Call Notifications

You can choose whether you hear sound effects—all phone sounds except call audio—from the handset,
headset, speaker, or the active audio device you set. For example, you can configure your phone to ring on
your headset instead of the speaker. By default, you hear all sound effects from the speaker.
T
ASK
1 Navigate to Settings > Basic > Preferences > Audible Ringer.
2 From the Audible Ringer screen, select a location to hear sound effects.
Polycom, Inc.
Phone Settings
110