Receiving Ptt Broadcasts; Listen To A Ptt Broadcast During An Active Call - Polycom VVX 201 Series User Manual

Tip: To automatically send a PTT broadcast on the default channel, press and hold Talk. After the trans-
mitting beep, begin speaking.
T
ASK
1 Select Talk.
2 From the PTT Channels screen, select a channel.
A list is displayed with the default channel, the most recent channel you sent a broadcast on, and
other channels you can broadcast on.
3 Press and hold Talk to start the broadcast.
Be sure to hold Talk throughout the entire broadcast.
A transmitting beep is played then the phone displays the channel information.
4 Begin speaking.
5 When you finish your broadcast, do one of the following:
Release Talk.
When you release Talk while sending the broadcast, the broadcast temporarily stops and
enters a 10-second waiting period. During this period, the channel remains open to give others
a chance to reply. At any time during the waiting period, you can resume your broadcast by
pressing and holding Talk. If no one broadcasts during the waiting period, the channel closes
and the broadcast ends.
Select End PTT.
After you select End PTT, you can immediately initiate another broadcast on another channel,
even if the previous broadcast is in the waiting period.
R :
ELATED INFORMATION
Change the Default Channel

Receiving PTT Broadcasts

To receive a broadcast sent on a particular channel, you need to be subscribed to that channel.
How you receive a PTT broadcast depends on the broadcast priority, whether you are in an active call, and
whether your phone is set up to receive broadcasts during active calls.
When you enable Do Not Disturb on your phone, you receive only Emergency broadcasts. Non-emergency
broadcasts do not display or play on your phone.
R :
ELATED INFORMATION
Update Channel Subscriptions

Listen to a PTT Broadcast during an Active Call

How you handle a broadcast when you are in an active call depends on the broadcast priority and if your
phone is set up to receive a broadcast when you are in an active call.
The following occurs when you receive a broadcast during an active call:
● When your phone is set up to receive Normal broadcasts during an active call, the broadcast
immediately plays. You hear both the active call and the broadcast.
Polycom, Inc.
Accessing, Sending, and Broadcasting Messages
89