Change Idle Timeouts For Power Saving Mode; Changing Audio Settings - Polycom VVX 150 Manual

Change Idle Timeouts for Power Saving Mode

Update the period of time the phone is idle before the screen turns off.
You can specify different timeouts for office hours and nonoffice hours. By default, the setting for office
hours is much longer than the setting for nonoffice hours.
You can also specify the amount of time the phone waits to go idle after you press a key or tap the
screen (on touchscreen models). You can choose to set this time period longer than the other idle
timeouts. This prevents power saving mode initiating when you use the phone.
Once you press a key or tap the screen (on touchscreen models), the phone uses the
Note
idle timeout period with the highest value.
Procedure
1 Go to Basic > Power Saving > Timeouts.
2 Configure the following options:
•
Office Hours Idle Timeout: The number of minutes (1 to 600) the phone waits during
office hours before starting power saving mode.
•
Off Hours Idle Timeout: The number of minutes (1 to 10) the phone waits during nonoffice
hours before starting power saving mode.
•
User Input Idle Timeout: The number of minutes (1 to 10) the phone waits after you press
a key or tap the screen before starting power saving mode.
3 Select Save.
Related Topics
Power Saving Mode

Changing Audio Settings

You control certain audio settings on your phone, including the ringtone for incoming calls from all
contacts or a specific contact, where call notifications play, and the volume of the ringtone or call audio.
Related Topics
Poly VVX Business IP Phone Settings
Printed from Polycom, Inc. (http://documents.polycom.com) #{renderLang "en" MsgPDFPage} 165