Troubleshooting - Acer Altos R360 F2 Frequently Asked Questions Manual

Altos R360 F2 FAQ (Frequently Asked Questions)

27. Troubleshooting

1. I installed 32-bit Red Hat Enterprise Linux 6 on a 3 TB RAID volume. When I run the Disk Utility, it is only
2.2 TB available. No additional partition can be created in the free space.
ANSWER: This is due to the 1st RAID volume is more than 2TB. Please create the 1st RAID volume less than 2TB. ANSWER: ANSWER: ANSWER:
This is the limitation of 32-bit Red Hat Enterprise Linux 6.
NOTE. You can install 64-bit Red Hat Enterprise Linux 6 in EFI mode with 1st RAID volume more than 2TB.
2. How do I know the Windows Server 2008 R2 is installed in EFI mode or Legacy mode?
ANSWER: Please check the partition type with Disk Manager. The EFI System Partition indicates the Windows ANSWER:
ANSWER: ANSWER:
Sever 2008 R2 is installed with EFI mode. You could also check the partition type with diskpart command in
Windows command line.
3. How do I know the SuSE Linux Enterprise Server is installed in EFI mode or Legacy mode?
ANSWER: Please check the partition type with "df –a" command. The EFI partition indicates the SuSE Linux ANSWER: ANSWER: ANSWER:
Enterprise Server is installed with EFI mode.
96