Austroflamm Ruby 2.0 Operating Manual page 50

9 | Installation
50
EN
12) Wait until the message "Settings successfully transmit-
ted to WiRCU" appears. Then press "Finished".
13) Now disconnect the data cable from the WLAN Box.
Then shortly after, reconnect the cable.
14) Now wait until all 3 LEDs on the top of your WLAN Box
are permanently lit. (Should this not be the case, re-
peat the process as per the Section How to create the
connection to your WLAN network using an Android
device [}on page 44] and / or follow the section The
WLAN network "WiRCU-XXXXXX" is not found [}on
page 64]).
Operating manual Ruby 2.0