Austroflamm Ruby 2.0 Operating Manual page 36

9 | Installation
Fig. 33: Mounting the air distribution mod-
ule
Fig. 34: Connecting the cables
36
EN
4) Attach air distribution module to the stove and fasten
it.
ð When doing so, follow the correct installation as
shown below.
5) Connect to each other the cable from the air distribu-
tion module and the cable which leads to the control
unit.
ð Only one plug needs to be connected to the fan.
The second is not used.
6) Secure the upper part of the cable with a cable tie.
Operating manual Ruby 2.0