Austroflamm Ruby 2.0 Operating Manual page 54

9 | Installation
9.1.6.3.2
device
• In the SMART DEVICE MENU, activate the "WLAN" function.
• Open the Austroflamm PelletControl APP.
• You will now receive instructions for connecting the WLAN Box to the WLAN router. These will ap-
pear in the language that your Smartphone has activated as standard (if not, see Section Changing
the APP language displayed [}on page 66]).
• Read and confirm the displayed end user licence agreement.
• Then carry out the following steps shown on the screen:
54
How to create the connection to your WLAN network using an iOS
EN
1) Launch the AUSTROFLAMM PELLET CONTROL APP.
On launching, the APP displays the menu page
shown.
2) Press "No" unless your WLAN Box is already connec-
ted to your WLAN network.
Operating manual Ruby 2.0