Austroflamm Ruby 2.0 Operating Manual page 43

Operating manual Ruby 2.0
9.1.6.3 Downloading and integrating the Austroflamm PelletControl APP
To incorporate the WLAN Box into your WLAN network you will need the Austroflamm PelletControl
app on your SmartDevice.
The WLAN Box can only be operated with the Austroflamm PelletControl APP. The current version of
the Austroflamm PelletControl APP is available for download in the App Store (for iOS operating sys-
tems) and at Google Play (for Android operating systems). You can download the APP by scanning the
relevant QR code:
iOS PelletControl
Working with your SMART DEVICE (telephone, Tablet, etc.), and the AUSTROFLAMM PELLET CON-
TROL APP, the WLAN Box enables remote access to your heating appliance.
How remote access works:
• Commands are conveyed via the Austroflamm PelletControl APP, the Internet and the Cloud server
to the controls and the operating system (display or control knob). Please be aware: There is a time
delay between inputting the command and its execution.
• For pellet stoves with rotary control, the rotary control must be positioned at 3 o'clock for the
WLAN Box to work.
• If you connect the WLAN Box to a WLAN modem/router/Smartphone that is operated with mobile
data, please bear in mind the additional costs for data transmission.
EN
3) Now connect the FUMIS adapter to the WLAN Box.
Then connect one end of the supplied data cable to
the FUMIS adapter. Connect the 2nd end to the free
6-pin socket below the WLAN Box. This creates the
connection between the controls of your stove and
the WLAN Box.
As soon as the heating appliance is supplied with
power, the "CONT" LED on the WLAN Box will be con-
stantly lit and the "WI-FI" LED will flash as follows: 0.5
sec. ON / 0.5 sec. OFF.
Android PelletControl
9 | Installation
43