Austroflamm Ruby 2.0 Operating Manual page 64

9 | Installation
9.1.6.3.3
• Contact your AUSTROFLAMM dealer or carry out the connection process using a PC with the
WiRCU HOME PROGRAMMER software.
• This software is available free of charge as a download on the FUMIS HOMEPAGE https://www.fu-
mis.si/en/wircu-connection-guide. You are also shown here how to correctly manage the software.
9.1.6.4 How to reset the WLAN Box settings
Press the "SETUP WiFi RESET" button on the WLAN Box until all 3 LEDs on the top of the WLAN Box
are lit up together and then go out in sequence. This process requires approximately 10 Seconds.
Now you have deleted all the WLAN networks previously saved on the WLAN Box.
9.1.6.5 LED display/function information
The WLAN Box informs you of the current functional status via LEDs on the top of the box. (Knowing
the particular functional status is vital for resolving problems.)
The following functional status are displayed on the WLAN Box via LEDs:
64
The WLAN network "WiRCU-XXXXXX" is not found
EN
17) Your stove can now be operated via the APP. You can
read in Functions and operations of the Austroflamm
PelletControl APP [}on page 65] about the options
that the APP offers you.
Operating manual Ruby 2.0