Austroflamm Ruby 2.0 Operating Manual page 61

Operating manual Ruby 2.0 EN
11) Wait until the message "Settings successfully transmit-
ted to WiRCU" appears. Then press "Finished".
12) Now disconnect the FUMIS adapter from the WLAN
Box. Then shortly after, reconnect it to the WLAN Box.
13) Now wait until all 3 LEDs on the top of your WLAN Box
are permanently lit. (Should this not be the case, re-
peat the process as per the section How to create the
connection to your WLAN network using an iOS
device [}on page 54] and / or follow the section The
WLAN network "WiRCU-XXXXXX" is not found [}on
page 64]).
9 | Installation
61