Page 2
Tel: +43 (0) 7249 / 46 443 www.austroflamm.com info@austroflamm.com Edited by: Olivera Stojanovic Illustrations: Konstruktion Text: Technical department (Austroflamm) Copyright All Rights reserved. The contents of these instructions may be reproduced or distributed only with the consent of the publisher! Printing, spelling and typographical errors reserved.
Operating manual Slim 2.0 Contents Contents General information ............................Link to operating manual........................Copyright.............................. Purpose of the manual............................Storing the manual ..........................Structure of the manual........................Representations used.......................... Version control ............................. Abbreviations ............................Safety..................................Importance of the safety instructions ....................
Page 4
Contents Operating manual Slim 2.0 9.2.1 Rearranging the flue pipe connection ....................25 9.2.2 Mounting the external air connection at the rear ................28 9.2.3 External air supply at bottom without turntable ................29 9.2.4 Mounting the Keramott........................30 9.2.5 Installing the HMS..........................
Operating manual Slim 2.0 1 | General information General information You have decided in favor of an Austroflamm stove. Congratulations on your decision and thank you for your trust. Correct operation and care are essential for trouble-free operation and long service life.
You have in your hands an extract from our manual for this stove. For detailed information on opera- tion, installation, maintenance, help, etc., download the operating manual via our website http:// www.austroflamm.com via the respective product page. Scanning the QR code will take you straight to the product page for this stove. You will find the operat- ing manual under downloads.
Illustrations in this manual may differ from the delivered product. Representations used This manual is for the Slim 2.0 stove left. For the Slim 2.0 right, follow the same work steps, merely in- versed. The following representations are used in this manual: Steps with mandatory adherence to the sequence ü...
2 | Purpose of the manual Operating manual Slim 2.0 Version control We update our manuals on a continual basis. The current version can be found at our homepage www.austroflamm.com. Abbreviations Abbreviation Meaning Heat Memory System Stoves...
Operating manual Slim 2.0 3 | Safety Safety In this manual we give you numerous safety instructions for the safe operation of your stove. These in- structions are characterized differently as follows, depending on their importance: In this manual we give you numerous safety instructions for the safe operation of your stove.
3 | Safety Operating manual Slim 2.0 • The stove must only be operated with the doors closed. • The door and all the stove’s control devices must be closed when the stove is not in operation. • Please note that the surfaces of this stove heat up considerably during operation. We recommend that you use the protective glove supplied to operate your stove.
4 | Product overview Product overview Intended use The Austroflamm stove described in this manual is manufactured and tested with a type A1 self-closing and locking door under EN test EN 13240. NOTICE Operation is only permissible with closed/bolted door.
Page 12
4 | Product overview Operating manual Slim 2.0 1) Open (+) and closed (-) (primary/secondary air control- ler) Fig. 4: Air control Safety distances Fig. 5: Safety distances (view from above)
Operating manual Slim 2.0 4 | Product overview Energy label -80% Austrof amm Slim 2.0 -60% -40% -20% ENERGIA · ЕНЕРГИЯ · ΕΝΕΡΓΕΙΑ · ENERGIJA · ENERGY · ENERGIE · ENERGI 2015/1186 Fig. 6: Energy label Positioning of the nameplates Here we show where you can find the nameplate. You received a copy of the nameplate with the stove.
5 | Technical data Operating manual Slim 2.0 Technical data As a type 1 stove, a connection to a chimney already occupied with other solid-fuel stoves and ovens is possible provided that the chimney rating under DIN 4705 – part 3, does not contravene this.
Page 15
Operating manual Slim 2.0 5 | Technical data Particular precautions for assembly, installation or maintenance Described in the individual sections of the operating manual. Fuel Preferred Other suit- Space heating emis- Space heating emis- ηs fuel able fuel(s) [x%]: sions at nominal heat ef-...
Page 16
5 | Technical data Operating manual Slim 2.0 Properties for exclusive operation with the preferred fuels Specification Symbol Value Unit Specification Symbol Value Unit Heat output Thermal efficiency (fuel efficiency) (based on the NCV) Nominal heat effi- Pnom Thermal efficiency (fuel ef- 83.0...
Operating manual Slim 2.0 5 | Technical data General specifications Technical data Basic appliance Height [mm] 1505 Width [mm] Depth [mm] Weight [kg] steel/ceramic/soapstone Flue pipe outlet, diameter [mm] Nominal heat efficiency [kW] as per EN test EN 13240 Heat output, minimum [kW] Maximum heat output [kW] Space heating capacity, at least (depending on the building insulation) [m³]...
6 | Transport, handling and storage Operating manual Slim 2.0 Transport, handling and storage Transportation Immediately checked the goods delivered for complete- ness and damage in transit. Before installing the stove, check that all movable parts are working. Any defects before the installation of the stove must be reported.
Operating manual Slim 2.0 6 | Transport, handling and storage Storage The stove must be stored in a dry room/warehouse. Protect against dirt, heat and moisture. The following illustrations are attached to the crate and must be observed: • Fragile – always place upright – protect against moisture and store dry.
When connecting the flue pipes to the chimney, national and/or local safety regulations must be com- plied with. Your Austroflamm stove is fitted at the factory with a flue outlet at the top (diameter 130 mm). The connection can, as described in these instructions, be rearranged to the bottom. When con- necting with other pipe diameters the approval of your responsible chimney sweep is required.
Operating manual Slim 2.0 7 | Requirements at the installation location Room of installation Note that the room in which the stove is installed must have at least one door / one window leading to the outside, or be directly connected to such a room. For balanced flue operation, other heating appli- ances and extractor hoods must not be operated together with this heating appliance as part of the room air system.
8 | Fuel material/-quantity Operating manual Slim 2.0 Fuel material/-quantity Fuel Wood Many of our native types of wood can, after being appropriately dried, be burnt CO2-neutral in heat- producing appliances. Wood stands out because it grows again, can be sustainably harvested, re- quires little or no extra external energy to be invested in the fuel, and has a short journey from the pro- ducer to the consumer, which provides an optimal climate balance.
Page 23
Operating manual Slim 2.0 8 | Fuel material/-quantity Please observe at all times the maximum specified amount to be laid, even when putting on more wood! Otherwise your fire will not provide the desired efficiency - but above all considerable damage may be caused to your appliance, to gaskets and material and to the flue gas duct.
Maximum amount of fuel to be deposited: 1.3 kg wood. NOTICE Overheating Too great a quantity of fuel can lead to overheating and damage to your Austroflamm stove NOTICE To avoid damage you must NEVER operate your Stove a greater quantity of fuel than that specified in...
Operating manual Slim 2.0 9 | Installation Installation Installation must only be carried out by an authorized specialist company. Before installing the stove, check that all movable parts are working. Any defects must be reported be- fore the installation. In the following sections we will give you information on •...
Page 26
9 | Installation Operating manual Slim 2.0 3) Dismantle the rear heat shield. Fig. 12: Dismantling the heat shield 4) Remove the rear flue pipe cover. Fig. 13: Removing the rear flue pipe cover 5) Remove the bracket with seal. Fig. 14: Removing the bracket with seal...
Page 27
Operating manual Slim 2.0 9 | Installation 6) Replace parts and reinstall. Fig. 15: Replacing the cover and bracket 7) Remount the rear panel. Fig. 16: Installing the rear panel...
9 | Installation Operating manual Slim 2.0 9.2.2 Mounting the external air connection at the rear 1) To remove the rear panel, proceed as described in the section Removing the rear panel [}on page 57]. 2) Use a saw to remove the perforated cut-out on the rear panel.
Operating manual Slim 2.0 9 | Installation 9.2.3 External air supply at bottom without turntable 1) To remove the rear panel, proceed as described in the section Removing the rear panel [}on page 57]. 2) Remove the bottom perforated cut-out (1) in the rear panel using a saw.
Operating manual Slim 2.0 9 | Installation 9.2.5 Installing the HMS First remove the rear panel. To do so, proceed as described in the section Removing the rear panel [}on page 57]. 1) Dismantle the rear heat shield. Fig. 24: Dismantling the heat shield 2) Remove the rear flue pipe cover (1) (if present) and dismantle the flange plate (2).
9 | Installation Operating manual Slim 2.0 9.2.6 Mounting the top box 1) Attach the top box on top of the stove. Fig. 27: Attaching the top box 9.2.7 Mounting the side box 1) Attaching the side box (1) next to the stove.
Operating manual Slim 2.0 9 | Installation 9.2.8 Mounting the turntable without external air connection 1) Remove flue pipe bracket. Fig. 29: Removing the flue pipe bracket 2) Attach seal to the swivel elbow coupling Fig. 30: Attaching the seal to swivel elbow coupling 3) Mount the swivel elbow coupling.
9 | Installation Operating manual Slim 2.0 For this step it is recommended to work in pairs. 4) Carefully tilt stove forward and slide the turntable un- der the stove. 5) Set the stove upright again. Fig. 32: Tilting the stove...
Page 35
Operating manual Slim 2.0 9 | Installation 2) Attach seal to the swivel elbow coupling Fig. 35: Attaching the seal to swivel elbow coupling 3) Mount the swivel elbow coupling. Fig. 36: Fitting the swivel elbow coupling. For this step it is recommended to work in pairs.
Page 36
9 | Installation Operating manual Slim 2.0 ü Connect the connecting parts (2-6) together with the turntable (1). 5) Attach the seal adapter (2). 6) Mount the connecting part (3) from below. 7) Mount the connecting part (4) from above.
Operating manual Slim 2.0 10 | Settings Settings 10.1 Adjusting the door 1) Opening the door and set the lock at the marked points (1) as follows. Fig. 40: Setting the lock...
10 | Settings Operating manual Slim 2.0 • The doors can be adjusted - forward, backward, left and right - at these two screws with a screwdriver. Fig. 41: Pos. 1 Adjusting the door 10.2 Adjusting the turntable The Slim design is fitted with a turntable. This turntable can be operated even with the firebox doors closed.
Operating manual Slim 2.0 11 | Commissioning Commissioning 11.1 Initial Commissioning NOTICE During the initial commissioning and in the following 2-3 combustion cycles, only approx. 2/3 of the maximum fuel quantity is to be used. NOTICE To avoid damage you must NEVER operate your Stove a greater quantity of fuel than that specified in this manual! During the first 3-4 combustion cycles at nominal heat output, odors may develop.
12 | Operation Operating manual Slim 2.0 Operation 12.1 Before heating up The stove can only function properly if there is sufficient combustion air coming to the room of installa- tion (the appliance), specially if several firing installations are being operated at the same time. Ensure sufficient air supply before heating up.
Operating manual Slim 2.0 12 | Operation 9) As soon as the pieces of firewood are burning well all around (light, high flames), you can control the air supply with the controller. ð Control at maximum setting left = maximum heat output ð...
13 | Maintenance Operating manual Slim 2.0 Maintenance 13.1 Changing the seal on the door 1) Remove old seal from the door. 2) Glue in new seal with a suitable adhesive (e.g. silicon B310). Fig. 46: Changing the seal 13.2 Replace the glass window in the door 1) Open the door.
Page 43
Operating manual Slim 2.0 13 | Maintenance 3) Remove the door window. Fig. 48: Removing the door window 4) Glue the self-adhesive 8x2x40 seal, as illustrated, on to the front at the side of the handle. 40 mm 8 mm Fig. 49: Installing the door window 5) Reinstall all glass strips.
14 | Cleaning Operating manual Slim 2.0 Cleaning 14.1 Cleaning the stove, flue gas ducts and flue pipe The stove, the flue gas ducts and flues should be annually - possible even more often, e.g. • after the chimney has been cleaned •...
Page 45
Operating manual Slim 2.0 14 | Cleaning 3) Take the supplied cover and use it to cover the ash box. 4) Turn the handle of the cover clockwise until the handle engages. Fig. 52: Putting the cover on the ash box Fig. 53: Closing the cover...
14.3 Cleaning the door window Spray window with glass cleaner and leave it for a moment to take effect. • We recommend cleaning the glass with our Austroflamm glass cleaner or a commercially available window cleaner. • Prevent door- or window seals from coming into contact with water or cleaner, since these will oth- erwise harden and in doing so lose their function.
Operating manual Slim 2.0 15 | Help Help Problem Cause Solution The glass window is sooty Insufficient draft from time to time (depending on use) the window must be cleaned with glass cleaner Clarification with chimney sweeper (poss extend chimney/measure...
15 | Help Operating manual Slim 2.0 Problem Cause Solution Operating temperature not reached Bring stove to the operating temper- ature Sooting up of the window after 8- 10 hours of fires is normal Chimney draft too low Contact chimney sweep 15.1 Firebox lining...
Operating manual Slim 2.0 16 | Accessories Accessories Have defective parts (accessories, spare parts) replaced by your specialist stove dealer. This guaran- tees that stove is and remains safe and functional. You can obtain floor plates made of glass or steel, care products or the Heat Memory System for heat...
Page 54
17 | Spare parts Operating manual Slim 2.0 HMS left + right Item no. Quantity Item Item no. 719249 Turntable left + right Item no. Quantity Item Item no. Turntable set complete 130 055007 Connection parts for turntable 064004 Flue pipe connection, rotatable 130...
Page 55
Operating manual Slim 2.0 17 | Spare parts Rear panel left + right Item no. Quantity Item Item no. Rear panel smooth 061033-29 Side box left + right Item no. Quantity Item Item no. Side box 724603 P-disc 5x10x0.2 DIN988 718742 DH4.8x12X5 PA...
Page 56
17 | Spare parts Operating manual Slim 2.0 Top box left + right Item no. Quantity Item Item no. Hexagon nut M5 DIN934 718148-92 Large diameter washer for M5 DIN9021 718214-92 Large diameter washer for M8 DIN9021 718324-92 Top box...
Operating manual Slim 2.0 18 | Dismantling Dismantling For correct uninstallation and dismantling of the stove, contact your Austroflamm specialist dealer. 18.1 Removing the rear panel 1) Open the door. 2) Undo the marked screws. 3) Remove the radiation protection (1).
18 | Dismantling Operating manual Slim 2.0 5) Fold open the rear panel somewhat on the right side. Fig. 57: Folding open the rear panel 6) Remove the rear panel. Fig. 58: Removing the rear panel 18.2 Dismantling the firebox door 1) Open the firebox door and the remove the screws and the small plates.
Operating manual Slim 2.0 18 | Dismantling 2) Carefully press the spring up and release. ð When releasing the spring, take care to ensure that your fingers won’t get caught. Fig. 60: Releasing the spring 3) Press the firebox door upward and unhinge it at the bottom.
NOTICE For correct uninstallation and dismantling of the stove, contact your Austroflamm specialist dealer. Electric and electronic components Remove the electric and electronic components from the appliance by dismounting them. These com- ponents must not be disposed of via non-recyclable waste.
Page 61
Operating manual Slim 2.0 19 | Disposal Handles and decorative elements made of metal If present, disassemble or remove handles and decorative elements made of metal and dispose of as metal scrap. Local disposal options must be observed.
For the replaceability of the warranty case the start-up log must be received by Austroflamm within one month at the latest of the initial commissioning. In or- der to make a claim on the warranty, repairs to your stove must only be carried out by a service en- gineer authorized by Austroflamm.
Operating manual Slim 2.0 21 | Start up log Start up log Operator / Customer Dealer / Engineer Name Company Street Street Town and postal code Town and postal code Telephone Telephone Email Email Stove Working Comments Model Serial number...
Page 68
Vollständigkeit / completeness / completo / complet Geprüft von / checked by / controlled da / contrôlé par ____________________________________________________ Datum / date / data / date ____________________________________________________ AUSTROFLAMM GMBH Austroflamm-Platz 1 A- 4631 Krenglbach Tel: +43 (0) 7249 / 46 443 www.austroflamm.com info@austroflamm.com...