Related Manuals for Austroflamm Clou Pellet
Summary of Contents for Austroflamm Clou Pellet
- Page 1 Benutzerhandbuch / User instructions/ Istruzioni per l’uso / Manuel d’instructions Clou Pellet / Clou Compact Pellet...
- Page 3 Clou Pellet / Clou Compact Pellet User instruction English...
-
Page 4: Table Of Contents
10 Technical data ........................30 Clou Pellet 8 kW / 10 kW ........................30 Clou Pellet 8 kW technical data according to Regulation (EU) 2015/1185 and delegated Regulation (EU) 2015/1186........................ 31 Clou Pellet 10 kW technical data according to Regulation (EU) 2015/1185 and delegated Regulation (EU) 2015/1186........................ - Page 5 Clou Pellet / Clou Compact Pellet User instruction English 14 Start up log .......................... 43 15 Service Report ........................45...
-
Page 6: Important Information For The Stove Operator
The information in this manual is of a general nature. National and European standards, local and building regulations, and fire safety provisions must be observed. • The initial commissioning of the appliance must be carried out by an authorised Austroflamm ser- vice partner or by Austroflamm Service GmbH & Co.KG. •... - Page 7 Clou Pellet / Clou Compact Pellet User instruction English • Please note that the installation room must have at least one door / one window leading to the out- side, or be directly connected to such a room. Other heating appliances and extractor hoods may...
-
Page 8: System Requirements
Clou Pellet / Clou Compact Pellet User instruction English 2 System requirements External combustion air supply Every combustion process requires oxygen. This is extracted from the ambient air. In modern buildings, the outer shell (windows and doors) is very tight. This means that insufficient combustion air flows in. -
Page 9: Fuel
To ensure your pellet stove operates correctly, a chimney draught of 3 Pa - 12 Pa is stipulated. • Austroflamm GmbH assumes no liability neither responsibility for connecting our heating ap- pliances to shared flue pipes/chimneys – multiple occupancy. For more information, refer to a chimney sweep and check your national, regional, and local building regulation. -
Page 10: Starting Up The Pellet Stove
The date and time are set by the service engineer using a technical display or via the optional WLAN- BOX using the Austroflamm PelletControl app. It is important to enter the current date and time. They are essential for ensuring that stored HEATING TIMES function correctly and that the control unit rec- ords the time of any malfunctions that occur in a log. -
Page 11: Service Due
The stove may continue to be operated for a short time after this alarm message appears. However, please call your authorised Austroflamm service engineer as soon as possible to carry out the neces- sary service. During the service, your stove will be thoroughly cleaned and the operating hours counter reset to 0. -
Page 12: Starting Up The Pellet Stove For The First Time
We recommend a restart temperature of 1.0 °C and a switch-off temperature of 0.6 °C as standard set- tings. Your authorised Austroflamm service engineer will discuss with you the settings you require during the initial commissioning stage. Starting up the pellet stove for the first time The stove body, many steel and cast iron components and the flue pipes are varnished with heat-re- sistant paint. -
Page 13: Important Information For Future Starts
Important information for future starts Every Austroflamm pellet stove is equipped with high-quality Keramott in the firebox. In addition to being extremely durable, the Keramott always whitens and remains white when the temperature in the firebox is sufficiently high. To achieve the necessary high temperatures in the firebox for the Keramott to burn cleanly, you must operate the pellet stove - e.g.: after the automatic start, when the Keramott is... -
Page 14: Operating The Stove Using The Dialing Knob
You can also start your pellet stove with the optional WLAN-BOX (smartphone and Austroflamm PelletControl app). To do this, however, you must first position the dialing knob at least in the 3 o'clock position. -
Page 15: Setting The Desired Heat Output Or Room Temperature
Clou Pellet / Clou Compact Pellet User instruction English Setting the desired heat output or room temperature To switch between the setting for "heat output" and "room temperature", turn the dialing knob anticlockwise to the "OFF" position while the stove is in operation, then immediately turn it clockwise again to the desired position. -
Page 16: Operating Your Stove Using The Smartphone Austroflamm Pelletcontrol App
Clou Pellet / Clou Compact Pellet User instruction English The room temperature can also be measured with the optional wireless SmartSpot from Austroflamm or an external thermostat. Your Austroflamm dealer will be happy to inform you about both products (advantages and disadvantages). -
Page 17: Thermostat - Smartspot And External Thermostat
The stove can also be controlled by an external thermostat if desired. The external thermostat is connected to the main control unit at input "I03" & "GND". The 2-pole plug required for this purpose is available from your Austroflamm dealer as an option under Art. No. 728 151. -
Page 18: Function Diagram
Clou Pellet / Clou Compact Pellet User instruction English Function diagram... -
Page 19: Alarms And Error Messages
Clou Pellet / Clou Compact Pellet User instruction English 5 Alarms and error messages ALARMS are displayed in yellow on the control panel. If an alarm is displayed, your pellet stove may still be used. See section 5.1 Resetting alarms & error messages. - Page 20 Clou Pellet / Clou Compact Pellet User instruction English ERRORS are displayed in red on the control panel. The pellet stove can now only be operated to a limited extent or not at all. See section 5.1 Resetting alarm & error messages.
- Page 21 Clou Pellet / Clou Compact Pellet User instruction English Error code Description Solution Error- E113 The flame temperature sensor measures exces- The temperature in sively high flue gas temperatures. The stove the flue gas ducts is switches off for safety reasons. Contact your Aus- too high troflamm service engineer for a solution.
-
Page 22: Clearing Alarm & Error Messages
Clou Pellet / Clou Compact Pellet User instruction English Clearing alarm & error messages Error message If an error occurs, the stove stops and the flame at the top right glows red. In addition, one or more power zones light up in different colours depending on the error. -
Page 23: Safety Temperature Limiter
Clou Pellet / Clou Compact Pellet User instruction English Safety temperature limiter Your stove is equipped with a safety temperature limiter on the back. This auto- matically switches off the stove if the auger shaft overheats. Should this happen, the cause of the overheating must be determined and remedied. Afterwards, the stove can be made ready for operation again by pressing the green reset pin in the safety temperature limiter. -
Page 24: Cleaning And Maintenance
Clou Pellet / Clou Compact Pellet User instruction English 7 Cleaning and maintenance The combustion pot of your pellet stove must be emptied each time before starting the appliance. Only a cleaned burn pot guarantees safe ignition when starting-up, and clean combustion. With the lifting tool sup- plied (see illustrations below), the combustion pot can be easily and safely removed, and taken away for emptying. -
Page 25: Cleaning Clou Pellet / Clou Compact Pellet
Clou Pellet / Clou Compact Pellet User instruction English Cleaning Clou Pellet / Clou Compact Pellet 7.1.1 Vacuuming the firebox and the burn pot Not included! The following CLEANING OPERATIONS may only be carried out by an authorised service engineer. - Page 26 Clou Pellet / Clou Compact Pellet User instruction English Brush the flue gas passes downwards. Not included! Remove the lower panel Remove the cleaning cover and vacuum the flue gas area. Not included! Dismantle and clean the flue gas fan.
-
Page 27: Guarantee / Warranty
For the replaceability of the warranty case the start-up log must be recei- ved by Austroflamm within one month at the latest of the initial commissioning. In order to make a claim on the warranty, repairs to your pellet stove insert must only be carried out by a service engineer authori- zed by Austroflamm. -
Page 28: Electrical Wiring Diagram
Clou Pellet / Clou Compact Pellet User instruction English 9 Electrical Wiring Diagram Dialing knob Pellet hopper lid switch RPM / HAL-IC Room temperature sensor Firebox temperature sensor Differential pressure measurement Central grounding Controller grounding Ceramic ignition Combustion fan Feeder motor... -
Page 29: Models With An On/Off Feeder Motor
Clou Pellet / Clou Compact Pellet User instruction English Models with an ON/OFF feeder motor... -
Page 30: Detailed Electrical Wiring Diagram
Clou Pellet / Clou Compact Pellet User instruction English Detailed electrical wiring diagram 9.3.1 *Power splitter 9.3.2 *Combustion fan... -
Page 31: Room Temperature Sensor And Smartspot
Clou Pellet / Clou Compact Pellet User instruction English 9.3.3 *Room temperature sensor and SmartSpot 9.3.4 *Model with a permanently rotating feeder motor... -
Page 32: Technical Data
Clou Pellet / Clou Compact Pellet User instruction English 10 Technical data Clou Pellet 8 kW / 10 kW Distance to combustible parts Nominal heat efficiency (NHE) 8 / 10 kW Heat output at partial load (PL) 2,4 / 2,4 kW Room-heating capacity 98 - 255 / 128 –... -
Page 33: Clou Pellet 8 Kw Technical Data According To Regulation (Eu) 2015/1185 And Delegated Regulation (Eu) 2015/1186
Clou Pellet / Clou Compact Pellet User instruction English Clou Pellet 8 kW technical data according to Regulation (EU) 2015/1185 and delegated Regulation (EU) 2015/1186 Contact details for the manufacturer or their authorised representative Manufacturer: Austroflamm GmbH Contact: Address: Austroflamm-Platz 1... - Page 34 Clou Pellet / Clou Compact Pellet User instruction English Particular precautions for assembly, installation or maintenance Described in the individual sections of the operating manual. Fuel Preferred Other sui- Space heating emissi- Space heating emis- ηs fuel table [x%]: ons at nominal heat...
- Page 35 Clou Pellet / Clou Compact Pellet User instruction English Properties for exclusive operation with the preferred fuels Specification Symbol Value Unit Specification Symbol Value Unit Heat output Thermal efficiency (fuel efficiency) (based on the NCV) Nominal heat effi- Pnom Thermal efficiency (fuel 90.0...
-
Page 36: Clou Pellet 10 Kw Technical Data According To Regulation (Eu) 2015/1185 And Delegated Regulation (Eu) 2015/1186
Clou Pellet / Clou Compact Pellet User instruction English Clou Pellet 10 kW technical data according to Regulation (EU) 2015/1185 and delegated Regulation (EU) 2015/1186 Contact details for the manufacturer or their authorised representative Manufacturer: Austroflamm GmbH Contact: Address: Austroflamm-Platz 1... - Page 37 Clou Pellet / Clou Compact Pellet User instruction English Particular precautions for assembly, installation or maintenance Described in the individual sections of the operating manual. Fuel Preferred Other sui- Space heating emissi- Space heating emis- ηs fuel table [x%]: ons at nominal heat...
- Page 38 Clou Pellet / Clou Compact Pellet User instruction English Properties for exclusive operation with the preferred fuels Specification Symbol Value Unit Specification Symbol Value Unit Heat output Thermal efficiency (fuel efficiency) (based on the NCV) Nominal heat effi- Pnom 10.0 Thermal efficiency (fuel 89.0...
-
Page 39: Clou Compact Pellet 6 Kw
Clou Pellet / Clou Compact Pellet User instruction English Clou Compact Pellet 6 kW Distance to combustible parts Nominal heat efficiency (NHE) 6 kW Heat output at partial load (PL) 1,5 kW Room-heating capacity 65 – 165 m³ Efficiency ≥90 % CO content at NHE <250 mg/Nm³... -
Page 40: Clou Compact 6 Kw Technical Data According To Regulation (Eu) 2015/1185 And Delegated Regulation (Eu) 2015/1186
Clou Pellet / Clou Compact Pellet User instruction English Clou Compact 6 kW technical data according to Regulation (EU) 2015/1185 and delegated Regulation (EU) 2015/1186 Contact details for the manufacturer or their authorised representative Manufacturer: Austroflamm GmbH Contact: Address: Austroflamm-Platz 1... - Page 41 Clou Pellet / Clou Compact Pellet User instruction English Particular precautions for assembly, installation or maintenance Described in the individual sections of the operating manual. Fuel Preferred Other sui- Space heating emissi- Space heating emis- ηs fuel table [x%]: ons at nominal heat...
- Page 42 Clou Pellet / Clou Compact Pellet User instruction English Properties for exclusive operation with the preferred fuels Specification Symbol Value Unit Specification Symbol Value Unit Heat output Thermal efficiency (fuel efficiency) (based on the NCV) Nominal heat effi- Pnom Thermal efficiency (fuel 87.2...
-
Page 43: Accessories
Clou Pellet / Clou Compact Pellet User instruction English 11 Accessories Art. No. Equipment 805002 SmartSpot sensor white 805004 SmartSpot receiver 805005 SmartSpot sensor premium 800012 optional WLAN-BOX 640170 Cleaning brush pellet stove Ø 40 x 1000 mm 059008 Adjustable plastic feet 20x20 complete (6 pieces) 12 What is included Art. -
Page 44: Data Processing
Clou Pellet / Clou Compact Pellet User instruction English 13 Data processing... - Page 45 Clou Pellet / Clou Compact Pellet User instruction English 14 Start up log Operator / Customer Dealer / Engineer Name Company Street Street Town and postal code Town and postal code Telephone Telephone Email Email Pellet stove Model Control software version...
- Page 46 Clou Pellet / Clou Compact Pellet User instruction English Instructions for Operator / Customer Instructions for handling the appliance ex- Cleaning and maintenance interval explained plained clearly and comprehensibly Terms of the guarantee and warranty ex- Photographic documentation of actual condi- plained.
- Page 47 Clou Pellet / Clou Compact Pellet User instruction English 15 Service Report...
- Page 48 Clou Pellet / Clou Compact Pellet User instruction English AUSTROFLAMM GMBH Austroflamm-Platz 1 A-4631 Krenglbach Tel: +43 (0) 7249 / 46 443 www.austroflamm.com info@austroflamm.com 940302 Stand 11/2022...