Austroflamm Ruby 2.0 Operating Manual page 45

Operating manual Ruby 2.0 EN
3) The APP will guide you step by step with instructions
through the connection process. Follow these instruc-
tions.
4) Press the "SETUP WiFi RESET" button on the WLAN
Box. After the button is pressed, the WLAN LED will
flash rapidly (see Section LED display/function inform-
ation [}on page 64]).
5) With that, the WLAN BOX activates your own "WiRCU-
XXXXXX" WLAN network.
After this process starts you have approx. 3 minutes
time to create the connection between the WLAN
Box and your WLAN network. (If you exceed this
period, you will have to repeat the connection pro-
cess.)
9 | Installation
45