Resetting Warnings And Errors; Safety Temperature Limiter; Firebox Lining - Austroflamm Ruby 2.0 Operating Manual

Operating manual Ruby 2.0

16.2 Resetting warnings and errors

In the event of a warning or error a yellow or red message with the description is displayed.
Fig. 93: Warning
Fig. 94: Error

16.3 Safety temperature limiter

1
Fig. 95: Safety temperature limiter

16.4 Firebox lining

The lining of your pellet stove consists of Keramott, a high-quality material with special combustion
properties and an attractive appearance. During or after operation this lining may have superficial hair-
line cracks, which do not however affect functioning. Replacement of such parts is not required!
EN
1) To close the warning display, tap
ð Closing the display does not reset the warning.
ð To reset the warning, the problem must be re-
solved.
ð However, the stove can continue to be operated
despite the warning display being active.
2) Close the error display by tapping
ð Closing the display does not reset the error.
ð To reset the error, the problem must be resolved.
ð When an error occurs the stove cannot be oper-
ated.
Your stove is fitted on the back with a safety temperature
limiter (1).
This automatically switches off in the event of overheating
(temp. ≥ 105 °C). In the event of a switch-off the cause must
be determined. To make the stove operable again, after
cooling down, press in the green reset button on the safety
temperature limiter.
Safety temperature limiter (1) with removable black protect-
ive cap.
16 | Help
.
.
101