Austroflamm Ruby 2.0 Operating Manual page 42

9 | Installation
9.1.6.2 How to attach the WLAN Box to the stove
42
EN
1) On the right-hand side of the rear panel of the stove
there are 2 boreholes with hexagon socket M4 x 8
screws prepared for the mounting of the WLAN Box.
These screws must be unscrewed with a 2 mm Allen
key before mounting.
2) Now mount the WLAN Box on the rear panel in the
position illustrated.
IMPORTANT: The connection for the FUMIS adapter
should be located on the top of the WLAN Box. In this
position the MAC address and the PIN number on the
visible side of the WLAN Box can always be seen.
Operating manual Ruby 2.0