ADC FlexWave Prism System Reference Manual page 314

SNMP Interface
Table 12-2. FlexWave-URH Agent MIB GET/SET Objects (Cont.)
Object Name
fwuRmtSERFRIHWRev
fwuRmtSERFRISerialNumber
fwuRmtSERFRIADCPartNumber
fwuRmtSERFOptSFPNumber
fwuRmtSERFOptSFPName
fwuRmtSERFOptSFPType
fwuRmtSERFOptSFPColor
fwuRmtSERFOptRevLaunchPowerMeas
fwuRmtSERFOptFwdLaunchPowerMeas
fwuRmtSERFOptMateName
fwuRmtSERFIPEnable
fwuRmtSERFOptRxBERFaultThreshold
fwuRmtSerfOptOverDriveFaultThreshld
fwuRmtSerfOptUnderDriveFaultThreshld
fwuRmtSERFOptRxBERFaultMask
Page 300
© 2009 ADC Telecommunications, Inc
Description
Remote SeRF Inventory -
Hardware Version of the
Remote system
Remote SeRF Inventory-Serial
Number
Remote SeRF Inventory-ADC
Part Number
A unique identifier of each
SFP (from 1 to 8)
User defined name of each
Remote SFP.It can be 32
character long.
SFP Type-Optical Port Type
SFP wavelength in nanometer.
Value of Remote Receive
measured optical power in
dbm
Value of Remote Transmit
measured optical power in
dbm
Name of Remote mate
IP Enable mode for Host
connected to the Remote that
is carrying RF, where 1 equals
enable
Threshold Value for declaring
a Decoded word error state of
the primary wavelength
optical receiver (too many
errors). This is not user
settable.
Threshold value for declaring
SFP over drive fault. This is
not user settable.
Threshold value for declaring
SFP under drive fault. This is
not user settable.
Trap enable/disable for
primary wavelength optical
receiver; trap is enabled by
default; if disabled, the trap
will not be raised
FlexWave Prism Host, Remote and EMS 5.1 System Reference
ADCP-77-073 • Issue 2 • 11/2009
SNMP Syntax
DisplayString
DisplayString
DisplayString
INTEGER
DisplayString
OPTICSType
Integer32
DisplayString
DisplayString
DisplayString
Integer
DisplayString
Integer32
Integer32
MASKType
CORNING EX1005, page 314
IPR2021-00762
Get
or
SET
GET
GET
GET
GET
SET
GET
GET
GET
GET
GET
GET
SET
SET
SET
SET