ADC FlexWave Prism System Reference Manual page 11

Fonts
You will find the following font conventions in use throughout the document:
• indicates a reference to a EMS dialog box, menu item, configuration
This font
option, or other parameter.
• This font indicates text you type at a prompt.
• T F
HIS ONT indicates keys that you need to press on your keyboard.
• • When a procedure requires clicking on a sequence of items, commas separate the
items. For example, "click
the Function Explorer Tree, you select the
select the
User Account
Illustrations
Some illustrations have numeric callouts. These callouts indicate the related step
numbers in the accompanying text.
F EMS P
OLLOWING THE
This document includes descriptions of how to use the FlexWave EMS to configure
and manage FlexWave Prism devices.
Starting a Procedure
All procedures in this document assume that you have already logged in to FlexWave
EMS as described in
Finishing or Canceling a Procedure
In general, the procedures in this document end each procedure with having you click
or to accept changes or input. However, you can also click
OK Apply
clicking to abandon any changes made, or click
Apply
shown.
The following table describes the most common EMS dialog buttons.
Button Function
OK Applies your configuration changes and closes the dialog.
Apply Applies your configuration changes without closing the dialog.
Close Discards any changes you have made in the dialog—unless you have
previously clicked
status dialog, closes the dialog.
Refresh Updates status information to reflect current conditions.
FlexWave Prism Host, Remote and EMS 5.1 System Reference
ADCP-77-073 • Issue 2 • 11/2009
User Account Management
node.
T
ROCEDURES IN HIS
"Access the EMS" on page
Apply
—and closes the dialog. In a performance or
,
User Account
User Account Management
D
OCUMENT
144.
to update the data being
Refresh
© 2009 ADC Telecommunications, Inc.
CORNING EX1005, page 011
" indicates that in
node, and then
without
Close
Page xi
IPR2021-00762