Viewing Host Dart Alarms - ADC FlexWave Prism System Reference Manual

Managing Host Units
9.7 V
IEWING
A Host may support up to eight DART cards. Each DART card provides one RF band
for up to eight Remotes. The DART card converts between serial (optical) and RF data
in both forward and reverse directions. The
all DART cards currently installed in the Host and provides an alarm summary status
indicator for each card. This page also provides a link, for each DART card, to a more
detailed page that can be used to configure the DART card and obtain alarm details
(for more information, see
1 1 In the Function Explorer Tree, select
the Host name) to open the
Frame.
2 2 In the
Information
to monitor. The
n corresponds to the DART whose
(where
DART
Page 226
© 2009 ADC Telecommunications, Inc
H DART A
OST
"Configure the Host DARTs" on page
System View
Host DART's Alarm Summary
column, click on the
Configuration and Alarm Details of DART
FlexWave Prism Host, Remote and EMS 5.1 System Reference
LARMS
Prism Host DART's Alarm Summary
Host- x
, ,
SERF
view in the EMS View
link for the DART that you want
Band-Config
n
on Host-
Band-Config
ADCP-77-073 • Issue 2 • 11/2009
CORNING EX1005, page 240
view lists
152).
- x
, (where is
DARTS
2
x window opens
link you selected).
IPR2021-00762