Flexwave Prism User Documentation - ADC FlexWave Prism System Reference Manual

F W P U
LEX AVE RISM
The FlexWave Prism user documentation is intended for system engineers,
administrators, and end users that are responsible for planning, administering,
configuring, and maintaining ADC FlexWave Prism systems. Familiarity with SNMP
and common network technologies is required.
Each FlexWave Prism document describes a different aspect of the FlexWave Prism
system. The following manuals correspond to this FlexWave Prism release:
Title
ADC® FlexWave Prism Host, Remote and EMS 5.1 System Reference
ADC® FlexWave Prism Host Unit Installation Guide
ADC® FlexWave Prism Remote Unit Installation Guide
ADC® FlexWave Prism Remote Mounting Kit Installation Instructions
ADC® FlexWave Prism Remote RF Module Installation Instructions
ADC® FlexWave Prism Coarse Wavelength Division Multiplexer User Manual
Icons
Three types of messages, identified by icons, appear in the text:
The Caution icon indicates operations or steps that could:
• • cause personal injury
• induce a safety problem in a managed device
• destroy or corrupt information
• interrupt or stop services.
The Note icon indicates text that contains information about special circumstances.
The User icon indicates text that lists which user roles are required for a procedure or
EMS access.
Page x
© 2009 ADC Telecommunications, Inc
D
SER OCUMENTATION
FlexWave Prism Host, Remote and EMS 5.1 System Reference
ADCP Number
77-073
77-071
77-072
77-077
77-079
77-075
ADCP-77-073 • Issue 2 • 11/2009
CORNING EX1005, page 010
IPR2021-00762