ADC FlexWave Prism System Reference Manual page 162

Initial Prism System Setup
11 1 Click . The new
Apply
view as part of the view title and in the
Summary
You may need to click in the Function Explorer Tree frame and then click Refresh before
the new name appears.
12 2 In the
10 MHz Reference Clock
board on each Host and Remote contains the master clock for that unit. At the
Remote, the reference is a clock derived from the Host clock. The
setting allows you to frequency lock the master clock to an external
Clock external
10 MHz reference.
When using the 10 MHz external reference clock, the signal must be connected to the
Host before enabling the clock in the software. If an external 10MHz reference clock is
selected for operation, but is not present or outside of the frequency range of 10MHz
+ /- 5ppm, communication between the Host and Remote over the optical fiber will fail.
Page 148
© 2009 ADC Telecommunications, Inc
displays in the Function Explorer Tree and the
Host Name
list, select
FlexWave Prism Host, Remote and EMS 5.1 System Reference
box.
Host Name
(default) or
internal external
ADCP-77-073 • Issue 2 • 11/2009
CORNING EX1005, page 162
Host
. The SeRF
10 MHz Reference
IPR2021-00762