ADC FlexWave Prism System Reference Manual page 315

Table 12-2. FlexWave-URH Agent MIB GET/SET Objects (Cont.)
Object Name
fwuRmtSERFOptOverDriveFaultMask
fwuRmtSERFOptUnderDriveFaultMask
fwuRmtSERFEthPortNumber
fwuRmtSERFEthPortType
fwuRmtSERFEthPortRxBytes
fwuRmtSERFEthPortRxPkts
fwuRmtSERFEthPortRxFscErrors
fwuRmtSERFEthPortRxBroadcastPkts
fwuRmtSERFEthPortRxMulticastPkts
fwuRmtSERFEthPortRxFragmtdFrames
fwuRmtSERFEthPortRxJabbersFrames
fwuRmtSERFEthPortTxByteCounter
fwuRmtSERFEthPortTxPkts
fwuRmtSERFEthPortTxBroadcastPkts
fwuRmtSERFEthPortTxMulticastPkts
fwuRmtSERFEthSFPID
fwuRmtDARTNumber
fwuRmtDARTName
fwuRmtDARTBandType
FlexWave Prism Host, Remote and EMS 5.1 System Reference
ADCP-77-073 • Issue 2 • 11/2009
Description
Trap enable/disable for SFP
Over Drive Fault. Trap is
enabled by default. If
disabled, the trap will not be
raised.
Trap enable/disable for SFP
Under Drive Fault; trap is
enabled by default; if
disabled, the trap will not be
raised
A unique identifier for each
Ethernet port (from 1 to 12)
An identifier for the type of
Ethernet port
Receive byte counter
Receive packet counter
Receive FCS error counter
Receive broadcast packet
counter
Receive multicast packet
counter
Receive fragments counter
Receive jabber counter
Transmit byte counter
Transmit packet counter
Transmit multicast packet
counter
Transmit broadcast packet
counter
Identifier of SFP to which this
Ethernet port connects to
A unique identifier for each
DART Card Object of Remote
(from 1 to 8)
A user defined name for each
DART Card object of Remote,
which can be up to 32
characters
Band type of Remote DART
card
© 2009 ADC Telecommunications, Inc.
FlexWave-URH Agent MIB
SNMP Syntax
MASKType
MASKType
Unsigned32
ENETType
Counter64
Counter64
Counter64
Counter64
Counter64
Counter64
Counter64
Counter64
Counter64
Counter64
Counter64
Unsigned32
Integer32
DisplayString
BANDType
Page 301
CORNING EX1005, page 315
IPR2021-00762
Get
or
SET
SET
SET
GET
GET
GET
GET
GET
GET
GET
GET
GET
GET
GET
GET
GET
GET
GET
SET
GET