ADC FlexWave Prism System Reference Manual page 201

4 4 In the confirmation dialog, click
the IP addressing and configuration will have been modified.
5 5 Disconnect the Ethernet cable from the Host Craft port and connect it to the Host
Network port.
CONNECTOR
FlexWave Prism Host, Remote and EMS 5.1 System Reference
ADCP-77-073 • Issue 2 • 11/2009
. Your current EMS session will close down as
OK
RJ-45
DETAIL
Working with Prism System Network Interfaces
22403-A
© 2009 ADC Telecommunications, Inc.
CORNING EX1005, page 201
Page 187
IPR2021-00762