Attaching The Devicenet Communications Unit Connector - Omron E5ZN-DRT Operation Manual

DeviceNet Communications Cables Wiring
3-4-2

Attaching the DeviceNet Communications Unit Connector

34
Align the DeviceNet Communications Unit connector with the cable connector,
and insert the cable connector fully into the DeviceNet Communications Unit
connector.
Tighten the set screws to a torque between 0.25 and 0.3 N·m to secure the
connector.
UNIT UNIT
BPS BPS
POWER POWER
ERROR ERROR
SD/RD SD/RD
OUT1 OUT1
OUT2
OUT2
SUB1 SUB1
SUB2 SUB2
E5ZN E5ZN E5ZN
• Using the Connector Provided with the DeviceNet Communications Unit
for a Multidrop Connection (Using Thin Cables)
When using Thin Cables for a multidrop connection, two wires of the
same color can be inserted into the one hole.
Crimp the two lines together that are to be inserted into the same hole us-
ing a special crimp terminal, as shown in the following diagram.
Crimp Terminal for Two Lines
Crimp terminal Lines
We recommend the following crimp terminals and crimp tools.
Crimp terminal
Phoenix Contact
Model: AI-TWIN2 0.5-8WH (product code
3200933)
Section 3-4
Crimp tool
Phoenix Contact
Model: UD6 (product code 1204436)