Omron E5ZN-DRT Operation Manual page 99

Maintenance Mode Window
Maintenance Mode
Window Display
Switching from the Icons in the Toolbar
1,2,3...
Switching from the View Menu
1,2,3...
84
Use either of the following two procedures to switch between the Main Win-
dow and the Maintenance Mode Window.
1. From the Main Window, click the
switch to the Maintenance Mode Window.
2. Click the
1. From the menu bar, select View and Large Icons (Maintenance Mode) to
switch to the Maintenance Mode Window.
2. From the menu bar, select View and Large Icons to return to the Main
Window.
Note 1. This icon indicates that the Network power supply is low.
2. This icon indicates that the Maintenance Bit is ON.
icon to return to the Main Window.
Section 5-3
icon in the Configurator Toolbar to