Maintenance Information Window - Omron E5ZN-DRT Operation Manual

Maintenance Mode Window
5-3-2

Maintenance Information Window

General Tab Page
1,2,3... From the Maintenance Mode Window, double-click the icon for the DeviceNet
Communications Unit in the Network Configuration Window. The following
Maintenance Information Window for the DeviceNet Communications Unit will
be displayed.
The following information can be checked from the General Tab Page.
Item
Comment
Last Maintenance Date
Unit
Conduction Time
Network Power Voltage Displays the present value for the communications power
Network Peak Power
Voltage
Network Bottom Power
Voltage
Unit Status
Note 1. Click the Refresh Button to read the maintenance information, error histo-
ry, and Temperature Controller maintenance information from the De-
viceNet Communications Unit and display the most recent values.
Details
Displays the comment set using the Unit comment func-
tion.
Displays the last maintenance date set in the DeviceNet
Communications Unit.
Displays the present value for the conduction time of the
DeviceNet Communications Unit.
voltage being supplied to the DeviceNet Communications
Unit.
Displays the peak communications power voltage supplied
to the DeviceNet Communications Unit after startup.
Displays the bottom communications power voltage sup-
plied to the DeviceNet Communications Unit after startup.
Displays the Temperature Controller power voltage status
(status of power supplied to the Terminal Unit).
Displays the communications power voltage monitor value
status (status from Network power voltage monitor).
Displays the DeviceNet Communications Unit conduction
time monitor status (monitor status from Unit conduction
time monitor).
Displays the Temperature Controller total ON/RUN time
monitor status (monitor status from ON/RUN time monitor).
(The contents of this Unit Status is the same as the alloca-
tion data Unit status.)
Section 5-3
85