Omron E5ZN-DRT Operation Manual page 21

Features and System Configuration
Transferring,
Monitoring, and
Operating from the
Configurator
E5ZN-DRT
DeviceNet Communications Unit
6
Any of the Temperature Controller parameters can be read or written from a
personal computer using the Configurator (Ver. 2.31 or later), and then saved
as a file.
The setup parameters for each Temperature Controller channel can be cop-
ied, allowing the same or similar settings to be easily set for multiple Temper-
ature Controllers.
DeviceNet Configurator
E5ZN Temperature Controller
CS/CJ-series DeviceNet Unit
DeviceNet
Unit Unit Unit
0 1 15
E5ZN Temperature Controllers
PLC
Serial connection
Setting, monitoring, and executing operation commands for the
Temperature Controllers using the Configurator.
Setting Temperature Controller settings and downloading them.
Monitoring Temperature Controller process values and target values.
Executing Temperature Controller operation commands.
DeviceNet Slave
Section 1-1