Allocating I/O from the Configurator
48
b) To delete an allocated parameter, select the parameter in the Al-
location Area field, and click the Release Button. To delete all the
allocated items, click the Release All Button. The Allocated Area
field will become blank.
Note a) The addresses for the offset +0 and +1 are the fixed location for
the Output Enable Bits. When any data is allocated to offset +2 or
higher, the Output Enable Bits will be allocated automatically.
b) Do not allocate the same parameter more than once (same pa-
rameter for the same channel of the same Temperature Control-
ler).
Section 4-3