Editing Temperature Controller Parameters - Omron E5ZN-DRT Operation Manual

Operations from the Edit Device Parameters Window
5-2-9

Editing Temperature Controller Parameters

1,2,3...
78
4. After the operation command is executed, click the Close Button.
The display will return to the Edit Device Parameters Window for the De-
viceNet Communications Unit.
Note By clicking the Manual Button, and changing the manual manipulated variable
in the Edit Unit Parameters Window, the output can be changed. For this oper-
ation, click the Download Setting Area 0 Button to stop the channel resetting.
By clicking the Move Button under Move to Protect Level, operations can be
protected locally from the Setting Display Unit to prevent malfunctions.
The Configurator can be used to edit the parameters of each connected Tem-
perature Controller through the DeviceNet Communications Unit.
1. Open the Edit Device Parameters Window for the DeviceNet Communica-
tions Unit, click the General Tab and click the Set Button next to the Tem-
perature Controller unit number under Unit Configuration.
Section 5-2