Omron E5ZN-DRT Operation Manual page 61

Allocating I/O from the Configurator
46
2. Select the General Tab.
Uploading the Real Configuration Online
3. With the Configurator online, click the Upload Real Configuration Button.
The real configuration will be uploaded, and the configuration of the Tem-
perature Controllers that are currently connected to the DeviceNet Com-
munications Unit and all the parameters for these Temperature Controllers
will be read.
Note a) Click the Upload Button to read the connection configuration re-
corded in the DeviceNet Communications Unit and all the param-
eters for the Temperature Controllers that are registered in the
configuration. The window display will refresh at the same time.
b) Click the Download Button to instantly write all the settings that
have been set using the Configurator to the DeviceNet Communi-
cations Unit and the Temperature Controllers. The Temperature
Controllers that have been written to will be reset automatically to
enable the settings. (The status of the Temperature Controllers will
be the same as if the power had been turned OFF and ON again.)
c) Click the Compare Button to compare the parameters set from
the Configurator with the parameters set in the DeviceNet Com-
munications Unit and in all the Temperature Controllers.
Editing the Connection Configuration Offline
Edit the Temperature Controller connection configuration (Unit configuration)
in the General Tab Page. Click the
Unit Configuration, and specify the type of Temperature Controller for the
selected unit number.
Section 4-3
Button beside the unit number under