Configure Actions For F3 (16-Key Models Only); Configure Actions For F4 (16-Key Models Only) - Datalogic PowerScan 9500 Series Product Reference Manual

FUNCTION KEYS CONFIGURATION (16-KEY MODELS ONLY)
Function Keys F3 through F5 are available on 16-key models only. For more
16-key programming, see
page 260.

Configure Actions for F3 (16-key models only)

DEFAULT
$CPWEU
Configure Actions for F3

Configure Actions for F4 (16-key models only)

DEFAULT
$CPWES
Configure Actions for F4
Product Reference Guide
Enter/Exit Programming Mode
"Additional Features for 16-key models"
$CPWEU0000\r
F3 No Actions Configured
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code for
the Function Key you want to program. Next scan 4 dig-
its from the Alphanumeric characters in
Keypad.
The first digit must be 0; the following 3 digits must be
configured according to the CMD_ID numbers in
Table 27 on page
ENTER/EXIT bar code again.
$CPWES0000\r
F4 No Actions Configured
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code for
the Function Key you want to program. Next scan 4 dig-
its from the Alphanumeric characters in
Keypad.
The first digit must be 0; the following 3 digits must be
configured according to the CMD_ID numbers in
Table 27 on page
ENTER/EXIT bar code again.
on
Appendix D,
253. End by scanning the
Appendix D,
253. End by scanning the
255