Configure Actions For F3 (16-Key Models Only) - Datalogic PD9330 Product Reference Manual

Enter/Exit Programming Mode
$CPWET
Configure Actions for F2
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
FUNCTION KEYS CONFIGURATION (16-KEY MODELS ONLY)
Function Keys F3 through F5 are available on 16-key models only. For more
16-key programming, see
page 241.

Configure Actions for F3 (16-key models only)

$CPWEU
Configure Actions for F3
236
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code for
the Function Key you want to program. Next scan 4 dig-
its from the Alphanumeric characters in
Keypad.
The first digit must be 0, the second is used by 4K and
16K model, the remaining third and fourth are used only
by 4K model. Second, third and fourth digit must be con-
figured according to the CMD_ID numbers in Table 27 on
page 253. Confirm the inserted value by scanning the
ENTER/EXIT bar code.
~
"Additional Features for 16-key models"
$CPWEU0000\r
F3 No Actions Configured
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code for
the Function Key you want to program. Next scan 4 dig-
its from the Alphanumeric characters in
Keypad.
The first digit must be 0, the second digit must be con-
figured according to the CMD_ID numbers in Table 27 on
page 253 . The third and fourth must be zero. Confirm
the inserted value by scanning the ENTER/EXIT bar
code.
PowerScan™ PD9330/PBT9300/PM9300
Appendix D,
CANCEL
on
Appendix D,