Table of Contents
Advertisement
6.13.1 Using the leather saddle
Sunlight and UV light tarnish the colour and cause
the leather to dry out and fade.
Park pedelec in the shade.
Always use a saddle cover.
Moisture may cause the leather to detach from
material beneath and mould may form.
If the leather saddle gets wet, dry saddle
completely.
Always use a saddle cover.
6.14
Using the pedals
The ball of the foot is placed on the pedal when
riding and pedalling.
1
Figure 161: Correct (1) and incorrect (2) foot position on
the pedal
6.15
Using the bell
1 Press the bell button downwards.
2 Let button spring back.
MY23I0a - 42_1.0_22.01.2024
6.16
Using the handlebars
Wear heavily padded cycling gloves.
This helps protect sensitive areas of your
palms.
Vary your grip position continuously while
riding.
This prevents overstraining and fatigue in your
hands.
6.16.1 Using multi-position handlebars
Only applies to pedelecs with this equipment
Multi-position handlebars are ideal for dynamic
riding. The contoured ends of the handlebars, also
known as horn handlebars, provide a variety of
grip options. Changing muscle groups reduces
strain on the hands, arms and back during longer
rides.
Vary your grip position continuously while
riding.
This prevents overstraining and fatigue in your
hands.
2
1
Figure 162: Grip positions on the multi-position
handlebars
Grip position 1
The top grip position is suitable for riding slowly.
Straighten your upper body without tensioning
in this position.
Grip position 2 and 3
The middle and bottom grip position is suitable for
fast rides and riding on inclines.
In the middle position, hold the arm and wrist
upright and relax tension.
In the bottom position, place your upper body
slightly lower. Keep your fingers close to the
brake handle ready for use.
Operation
2
3
163
Advertisement
Table of Contents
