Bosch i:SY E5 ZR F CX Translation Of Original Operating Instructions page 147

6.4.15.10Adjusting the on-board computer
The pedelec is stationary. You cannot open and

adjust the settings while riding.
Inserting the display.

Switching on the electric drive

1 Open S TA TUS S CR EE N .
2 Press the Select button.
The settings menu is displayed.
Menu Submenu
My eBike
→
<Range reset>
→
<Auto trip reset>
→
<Wheel circum.>
→
<Service>
→
<Components>
My Kiox
→
<Status bar>
→
<Language>
→
<Units>
→
<Time>
→
<Time format>
→
<Brightness>
→
<Settings reset>
Information
→
<Contact>
→
<Certificates>◦
Table 34: Basic structure of menu and sub-menu
 Use the Plus and Minus buttons to select the
required setting.
 Press the Select button to confirm.
 Use the Back button to return to the previous
menu.
 Follow the instructions on the on-board
computer.
MY23I0a - 42_1.0_22.01.2024
system.
6.4.15.11Selecting the language
1 Open <System> menu item.
2 Open < Language> sub-menu item.
3 Follow the instructions on the on-board
computer.
 The language has been selected.
6.4.15.12Adjusting the clock
1 Open <System> menu item.
2 Open <Time> sub-menu item.
3 Follow the instructions on the on-board
computer.
 The time has been set.
6.4.15.13Adjusting the time format
1 Open <System> menu item.
2 Open <Time format> sub-menu item.
3 Follow the instructions on the on-board
computer.
 The time format is set.
6.4.15.14Selecting units
1 Open <System> menu item.
2 Open <Units> sub-menu item.
3 Follow the instructions on the on-board
computer.
 The unit of speed is displayed in the selected
km/h or mph format.
6.4.15.15Setting the brightness
1 Open <System> menu item.
2 Open <Brightness> sub-menu item.
3 Follow the instructions on the on-board
computer.
 The brightness has been set.
Operation
147