Bosch i:SY E5 ZR F CX Translation Of Original Operating Instructions page 146

6.4.15.9 Adjusting the on-board computer
Notice
 Never use on-board computer, the display or
the display mount as a handle. If the on-board
computer, display or display mount are used to
lift the pedelec, components can become
irreparably damaged.
2 1
3
4
5
Figure 139: BOSCH LCD Remote operating elements
Symbol Designation
1 Increase brightness button/
>
Forward button (scroll left)
2 Decrease brightness button/
<
Back button (scroll right)
3 Select button
4 Plus button/
+
light button
5 Minus button/
–
push assist button
Table 33: Description of BOSCH LCD Remote operating
elements
You can use the select button (4) to perform the
following functions:
• Open the QUIC K ME NU while riding
• Open the SE T TI NGS M E NU on the S TA TUS
S CR E EN while the bicycle is stationary
• Confirm values and accept information
notifications
• Leave a dialogue.
MY23I0a - 42_1.0_22.01.2024
You can use the forward button (1) and back
button (2) to access the different user interfaces
with information on ride values even when riding.
This means both hands remain on the handlebars
while you are cycling.
You can use the plus button (4) and the minus
button (5) to increase and decrease the level of
assistance. You can use the buttons to scroll up
and down a list (such as the S ET TI NGS menu).
Open start screen
 Press On-Off button
 The S TA R T S C RE E N is displayed.
Opening the screens
 Press the Forward button or Back button.
 A new screen is displayed.
Open Status screen
1 Open the S TA R T SCRE E N.
2 Press the Back button.
 The S TA T US S CR E EN is displayed.
Operation
146