Table of Contents
Advertisement
6.4.9.6 Setting the grip distance for a MAGURA handbrake disc brake
Only applies to pedelecs with this equipment
WARNING
!
Crash caused by incorrectly set grip distance
If brake cylinders are set incorrectly or installed
wrongly, the braking power may be lost at any
time. This may cause a crash with injuries.
Ensure that the fully applied handbrake is at a
minimum distance of 20 mm from the
handlebars.
Figure 125: Adjusting the grip distance for a MAGURA handbrake disc brake
MY23I0a - 42_1.0_22.01.2024
The handbrake position can be adjusted to the
rider's requirements. Such adjustment does not
affect the pressure point or the position of the
brake linings.
Turn the setting screw/twist knob (5) anti-
clockwise towards minus (–).
The handbrake will move closer to the
handlebar grip.
Turn the setting screw/twist knob (5) clockwise
towards plus (+).
The handbrake will move away from the
handlebar grip.
Operation
131
Advertisement
Table of Contents
