Aluminum Scissor Lock; Adjusting; Replacing - Permobil Aero Z 2 Series Owner's Manual

CHAPTER 10: WHEEL LOCKS

Aluminum Scissor Lock

Adjusting

Tools Needed:
• 5 mm Allen Wrench
1. Loosen, but do not remove, the two Allen screws in the wheel lock clamp. See Figure 10-13.
2. Adjust the position of the wheel lock clamp on the frame so the wheel stop embeds at least 5 mm into the tire when
engaged in the locked position.
3. Securely tighten the two Allen screws that secure the wheel lock clamp to the frame.

Replacing

Tools Needed:
• 5 mm Allen Wrench
1. Loosen, but do not remove, the two Allen screws that secure the wheel lock clamp to the frame. See Figure 10-13.
2. Slide the wheel lock out of the clamp.
3. Slide the new Aluminum Scissor Lock into the wheel lock clamp, but do not tighten the two Allen screws.
4. Follow the procedure under "Aluminum Scissor Lock - Adjusting" on page 10-6 to position and secure the new
Aluminum Scissor Lock.
Permobil Aero Z & ZRA Owner's Manual
Figure 10-13
Adjusting/Replacing the Aluminum Wheel Lock
Wheel Lock
Clamp
Allen
Screws
10-7
Frame
Handle
Wheel Stop
Tire
OM0004-ENGLISH_Rev E_Aero Z_ZRA