Swing Away Flip-Back Armrest - Permobil Aero Z 2 Series Owner's Manual

CHAPTER 5: ARMRESTS
Removable Desk Arm
Armrest
Height
Adjustment
Bolt
Desk Arm
Housing

Swing Away Flip-Back Armrest

To flip back the armrest, raise the front of the armrest and rotate
it straight back as far as possible. Reverse this procedure to return
the armrest to its original position. See Figure 5-6.
To swing away the armrest, lightly lift up on the armrest and rotate
the armrest away from the chair. See Figure 5-6. To replace the
armrest, swing it back towards the chair and gently push it back
down into place.
Note: The Swing Away Armrests pivot on nylon sleeves located
inside the armrest receiver. If the armrest does not rotate properly,
check the sleeves for wear.
Permobil Aero Z & ZRA Owner's Manual
Figure 5-4
Removable Desk Arm with Transfer Loop
Armrest
Height
Release
Adjustment
Lever
Bolt
Desk Arm
Housing
Figure 5-5
Mounting Desk Arm
5-3
Release
Lever
Desk Arm
Housing
Desk Arm
Mount
Figure 5-6
Swing Away Flip-Back
OM0004-ENGLISH_Rev E_Aero Z_ZRA
Release
Lever