Releasing The Magnetic Wheel Locks; Wheel Lock Release - Permobil STREET Owner's Manual

Owner's Manual Street
Releasing the manual wheel locks
The wheel locks can be released in order to make it possible to move the wheel-
chair manually.
1. Shut off the wheelchair using the Power Switch button on the control panel.
2. Move the wheel lock release lever to the right, see the picture. The chair
can now be moved manually.
Location of the

wheel lock release

m
WARNING
Never use the wheelchair on a sloping surface with the brakes released.
Always ensure that the wheelchair is switched off when the brakes are activated/deactivated.
To prevent the wheelchair from rolling off, ensure that it is on a dry, level surface before releasing
the brakes.
Anyone who pushes a wheelchair with the brakes released must ensure that this is done safely
without risks.
Always reset the brake release after moving the wheelchair manually.
When the brakes are released, it should not be possible to drive the chair. If the chair can still be
driven, contact your service contact or Permobil immediately.
Releasing the
wheel locks
71
Handling