Removing; Adjustable Height Push Handles; Mounting - Permobil Aero Z 2 Series Owner's Manual

Location for Bolt-On Push Handles

Removing

Tools Needed:
• 5 mm Allen Wrench
• 4 mm Allen Wrench
1. Remove the three Allen screws and remove the clamp and handle. See Figure 4-10.

Adjustable Height Push Handles

Note: Adjustable Height Push Handles should only be used on aluminum backrests.

Mounting

Tools Needed:
• 5 mm Allen Wrench
1. See Figure 4-11 for the correct location to mount the Adjustable Height Push Handles.
2. Assemble the two halves of the clamp around the rigidizer bar. See Figure 4-12.
3. Insert the four Allen screws into the two halves of the clamp and securely tighten.
4. Insert the push handle through the clamp until the handle is at the desired height and securely tighten the quick release
cam lock.
5. During installation of push handle tube into the receiver, ensure the snap button has the ability to full extend below the
bottom of the clamp to act as a secondary safety feature. See Figure 4-13.
Note: The quick release cam lock enables the user to easily disengage and engage the clamp for purposes of repositioning
or removing the push handles.
I WARNING
Your assistant or attendant should NEVER attempt to lift a wheelchair up a curb, step or flight of stairs by lifting on any
removable (detachable) parts, such as Adjustable Height Push Handles. Similarly, your assistant or attendant should
NEVER attempt to lower a wheelchair down a curb, step or flight or stairs by holding onto any removable (detachable) parts,
such as the Adjustable Height Push Handles.
If you ignore this Warning, the removable parts, such as the Adjustable Height Push Handles, could detach from the
wheelchair causing you to fall, tip over or lose control of the wheelchair and seriously injure yourself or others or damage
the wheelchair.
Permobil Aero Z & ZRA Owner's Manual
CHAPTER 4: BACKRESTS AND PUSH HANDLES
Figure 4-9
"Top View"
Bolt-On Push Handles
Push Handle
29 mm
Allen Screws
4-6
Figure 4-10
Clamp
25 mm Allen Screw
OM0004-ENGLISH_Rev E_Aero Z_ZRA