Replacing The Backrest - Permobil Aero Z 2 Series Owner's Manual

CHAPTER 4: BACKRESTS AND PUSH HANDLES
If you ignore this Warning, your backrest posts could become loose or disconnected from the wheelchair, and you could
fall, tip over or lose control of the wheelchair and seriously injure yourself or others or damage the wheelchair.

Replacing the Backrest

Tools Needed:
• 4 mm Allen Wrench
1. Remove the backrest upholstery. See "Velcro
by Straps Back Upholstery" on pages 7-1 to 7-3.
2. Remove the backrest posts. See "Adjusting the Backrest Height" on pages 4-2 and 4-3.
3. Remove the backrest sleeves. See Figure 4-5.
4. Remove the two Allen screws (one on each side of the chair) and remove the backrest. See Figure 4-6.
5. Install the new backrest and securely tighten the two Allen screws.
6. Install the backrest sleeves in the new backrest.
7. Reinstall the backrest posts.
8. Reinstall the backrest upholstery.
Permobil Aero Z & ZRA Owner's Manual
Figure 4-4
Adjusting the Backrest Height
Backrest
Posts
Allen
Screws
Backrest
-Style Adjustable Back Upholstery" or "Tension Adjustable
®
4-3 OM0004-ENGLISH_Rev E_Aero Z_ZRA