Replacing The Upholstery; Seat Cushions; Velcro ® -Style Adjustable Seat Belt - Permobil Aero Z 2 Series Owner's Manual

CHAPTER 7: BACK UPHOLSTERY, SEAT UPHOLSTERY
AND SEAT CUSHIONS

Replacing the Upholstery

Tools required:
• 3 mm Allen Wrench
1. Remove the seat cushion.
2. Detach the back upholstery from the seat upholstery (see "Velcro
"Tension Adjustable by Straps Back Upholstery" on pages 7-2 and 7-3).
3. Remove all bolts that attach the seat upholstery to the chair frame. See Figure 7-7.
4. Remove the Bolt-On Seat Sling.
5. If your replacement upholstery included new aluminum seat rails, proceed to Step 6. If not, remove the aluminum seat
rails from the old upholstery and insert them into the new upholstery.
6. Place the new seat upholstery on the frame and align the fastening holes in the upholstery and aluminum seat rails with
the holes in the seat tubes of the frame.
7. Loosely install all the bolts on the side of the seat sling where the adjustment flap is located.
8. Install all the bolts on the opposite side of the seat sling and securely tighten.
9. Detach the adjustment flap and adjust the seat upholstery to the desired tension.
10. Fully tighten the bolts that attach the seat upholstery to the frame.
11. Reattach the bottom of the back upholstery to the seat upholstery and replace the seat cushion.

Seat Cushions

For seat cushions manufactured by other manufacturers ( e.g. ROHO, Comfort Company, StimuLite, Varilite, etc.),
consult the owner's manual provided by the applicable manufacturer.
Velcro -Style Adjustable Seat Belt
®
I WARNING
Installation of the Velcro
®
technician.
If you ignore this Warning, serious injury may result.
Permobil Aero Z & ZRA Owner's Manual
Adjusting/Replacing Bolt-On Seat Sling
Allen
Screws
-Style Seat Belt must be performed by an authorized Permobil Manual dealer or qualified
Figure 7-7
Bolt-On
Seat Sling
Adjustment
Flap
-Style Adjustable Back Upholstery" on page 7-1 or
®
7-5 OM0004-ENGLISH_Rev E_Aero Z_ZRA