Wheel Lock Release Cable - Permobil C500 Service Manual

Wheel lock release cable

Wheel lock release cable
Removal
1. Raise the seat to the highest position. If the
chassis is equiped with fixed seat post, see
page 34. If the seat elevator does not work
normally because the batteries are discharged
or the actuator is defective, the seat can be
raised/lowered manually, see page 30.
2. Switch off the main power switch on the control
panel.
3. Remove the seat elevator cover, chassis cover
and the right front fender, see page 7.
4. Remove the wheel lock release mechanism. It
is attached with two screws; see fig.
5. Remove the lock nut (1).
6. Screw in the adjusting screw (2) fully.
7. Remove the cable at the magnetic wheel lock
by pulling the cable casing forward and
passing the cable through the slot in the cable
holder. Detach the wheel lock release cable
from the magnetic wheel lock.
8. Remove the cable from the release lever.
The wheel lock release mechanism
is attached with two screws.
Adjustment of wheel lock release cable.
Lock nut (1) Adjusting screw (2).
Wheel lock release cable attachment
at the magnetic wheel lock.
22
1 2