Chapter 6: Side Guards; Rigid Removable And Quad Removable Side Guards (Aluminum And Carbon Fiber); Using Rigid Side Guards; Adjusting - Permobil Aero Z 2 Series Owner's Manual

CHAPTER 6: SIDE GUARDS

Rigid Removable and Quad Removable Side Guards (Aluminum and Carbon Fiber)

Using Rigid Side Guards

To remove either type of Rigid Side Guard, lift the side guard out of the side guard mount by grasping it at the top or place
finger in the hole and pull it upward. See Figure 6-1. To replace, place the bracket into the slot between the side guard
mount and the clamp and push down.
Quad Removable
Side Guard

Adjusting

Tools Needed:
• 3 mm Allen Wrench
You can adjust the "snugness" of the fit of the side guard bracket in the side guard mount by loosening or tightening the two
Allen screws in the side guard mount. See Figure 6-2.
Either type of Rigid Side Guard can be made "non-removable" by firmly tightening the two Allen screws in the side guard
mount while the side guard is installed.
Permobil Aero Z & ZRA Owner's Manual
Figure 6-1
Rigid Side Guards
Bracket
Figure 6-2
Adjusting/Removing/Reinstalling
Bracket
Side Guard
Mount
Allen
Screws
Side Guard
Mount
Allen
Screw
Dowel
Pin
Clamp
6-1
Rigid Removable
Side Guard
Clamp
OM0004-ENGLISH_Rev E_Aero Z_ZRA