Chapter 12: Rear Wheels; Rear Wheel With Quick-Release Axle; Removing; Replacing - Permobil Aero Z 2 Series Owner's Manual

CHAPTER 12: REAR WHEELS

Rear Wheel with Quick-Release Axle

Removing

1. Hold wheel securely at the hub. See Figure 12-1.
2. Depress the release button on the quick-release axle and slide
the wheel and axle out of the axle sleeve.
3. Release the release button.

Replacing

I WARNING
Make sure the locking balls fully secure the quick-release axle
inside the axle sleeve before operating the chair.
1. Hold wheel securely at the hub. See Figure 12-1.
2. Depress the release button on the quick-release axle,
making sure the locking balls recess into the axle.
3. Insert the axle all the way into the axle sleeve.
4. Release the release button.
5. Pull firmly on the wheel (without depressing the release button)
to make sure the wheel is locked securely in place.

Quad Quick-Release Axle

Removing
1. Unlock the lever on the Quad Quick-Release Axle. See Figure 12-2.
2. Slide wheel and axle out of the axle sleeve.
Replacing
I WARNING
Make sure the locking balls fully secure the Quad Quick- Release Axle
inside the axle sleeve before operating the chair.
If you ignore this Warning, you may fall, tip over or lose control of
the wheelchair and seriously injure yourself or others or damage
the wheelchair.
1. Hold the wheel securely at the hub. See Figure 12-2.
2. Unlock the lever on the Quad Quick-Release Axle,
making sure the locking balls recess into the axle.
3. Insert the axle all the way into axle sleeve.
4. Lock the lever on the Quad Quick-Release Axle.
5. Pull firmly on the wheel (without unlocking the lever)
to make sure the wheel is locked securely in place.
Permobil Aero Z & ZRA Owner's Manual
Removing and Replacing the Rear Wheel
with the Quick-Release Axle
Hub
Release
Button
Removing and Replacing the Rear Wheel
with the Quad Quick-Release Axle
Hub
Release
Lever
(locked)
12-1
Figure 12-1
Axle
Figure 12-2
Axle
OM0004-ENGLISH_Rev E_Aero Z_ZRA