Adjusting The Armrest Height - Permobil Aero Z 2 Series Owner's Manual

Adjusting the Armrest Height

Tools Needed:
• 4 mm Allen Wrench
1. Remove the armrest from the receiver.
2. Remove the Allen screw and washer securing the armrest stop. See Figure 5-7.
3. Reassemble the armrest stop in the desired location on the armrest upright (in 13 mm increments).
4. Securely tighten the Allen screw.
5. Reinstall the armrest in the receiver.
Permobil Aero Z & ZRA Owner's Manual
Figure 5-7
Adjusting the Armrest Height
Armrest
Upright
Washer
Armrest
Stop
CHAPTER 5: ARMRESTS
Allen
Screw
5-4 OM0004-ENGLISH_Rev E_Aero Z_ZRA