Commissioning; Preparation; Remove The Transport Securing Device - Beckhoff XTS Operating Instructions Manual

Commissioning

5 Commissioning

5.1 Preparation

5.2 Remove the transport securing device

44 ───
After unpacking the XTS starter kit with NCT technology, you must
remove the transport securing devices on the movers and connect
the cables.
Required tool
• Suitable torque wrench
• Allen key 2 mm
• Allen key 3 mm
• Allen key 4 mm
• Slotted screwdriver
• Feeler gauge with 0.7 to 1 mm feeler gauge blades
Required accessories [+]
• Assembly tool for B23 connectors
► Loosen screw [1]
► Remove the transport securing device [2] to the side
XTS Starter Kit with NCT Functionality Version: 1.4