Inserting - Beckhoff XTS Operating Instructions Manual

7.1.3 Inserting

Mover alignment
Version: 1.4
NOTICE
Observe the order of the movers
A change in the order of movers or a different number of movers
on the system requires an adjustment to the project.
The NCT electronics [1] must be located on the side of the name
plate [2] when the mover is inserted.
► Insert mover [1] with the NCT electronics [2] via the rail on sup-
port [3]
► Observe correct alignment of the NCT electronics [2] to the
name plate [4]
XTS Starter Kit with NCT Functionality
Assembly and disassembly
─── 61