Commissioning
5.5 System test
5.6 Start system
48
───
► Connecting the starter set to the mains
► Switch on starter kit at control cabinet [1]
The following LEDs [1] must light up:
• Link / Act
• 48 V / 16 A
• 24 V / 4 A
If the LEDs do not light up:
► Check cables and connectors
► Check the power supply units and fuses for voltage
► Contact the Support/Applications Department
After the starter kit has been connected and switched on:
The Stop button [1] on the control cabinet lights up red continuously.
The Reset button [2] must flash blue.
► Press Reset button [1]
► Ensure that the Emergency stop button is unlocked
XTS Starter Kit with NCT Functionality
Version: 1.4