Assembly - Beckhoff XTS Operating Instructions Manual

Assembly and disassembly

7.2.4 Assembly

66 ───
NOTICE
Note mover type
The NCT electronics may only be attached to mover
AT9014-1070-x550. All other movers are not suitable for mount-
ing the NCT electronics.
If you mount the NCT electronics on other movers, damage to
movers and modules may result.
► Tighten the NCT electronics [1] to the mover [3] with screws [2]
► Observe tightening torques:
Components
Screws, M6 x 25
► Plug the connector [1] of the cable bridge into the connection
strip of the NCT electronics [2]
► Tighten screws [3] on the cable bridge
XTS Starter Kit with NCT Functionality
Tightening torque [Nm]
4
Version: 1.4